📷 Na doplnění detailních informací právě pracujeme.
Máte-li jakýkoliv dotaz k tomuto produktu, neváhejte nás kontaktovat na info@fotobatohy.cz – rádi vám poradíme.
Děkujeme za vaši trpělivost.
Tým Fotobatohy.cz
,VSGO AirLink USB C Powered Mini Air blower Pro set Black
The VSGO AirLink Mini Air Blower is an electric blower that clears dust with a brushless motor instead of a rubber bulb. There is no battery inside: you connect it to a power bank or a charger with the supplied cable. The slider sets the power anywhere from 5 to 110 watts.
Highlights
Brushless motor running at up to 100,000 rpm
Airflow speed up to 40 m/s and an air volume of 460 litres per minute
Powered over USB C, from a charger or power bank that supports PD 3.1
Built in 0.3 micron HEPA filter keeps the air you blow out clean
Weighs 77 grams and comes with two nozzles, a 1.5 metre cable and a storage case
Power
The blower draws its power from the USB C connection, so there is no battery to run flat. Use a charger, cable or power bank that supports PD 3.1, otherwise the full output is not available. The USB C port of a laptop or phone supplies too little for the highest setting, and Apple chargers and cables do not always work because of their own charging protocol.
Airflow
The motor builds up 5.0 kPa of air pressure, enough to shift dust that sits between the keys of a keyboard or in the seams of a camera body. The HEPA filter sits in the intake, so the air you blow onto a sensor is clean itself.
Operation
You push the slider forward to start and further for more power, with no fixed steps. The noise level stays below 85 dB even at the highest setting.
Versatile use
The narrow nozzle lets you aim along a sensor, inside a mirror box or between the keys of a mechanical keyboard. The air mattress nozzle inflates an air bed or another inflatable and deflates it again. The supplied 1/4 inch adapter on the underside puts the blower on a tripod with a 1/4 inch thread.,
Type: electric camera air blower
Color: Black
Motor: brushless
Motor speed: up to 100,000 rpm
Airflow speed: up to 40 m/s
Air pressure: up to 5.0 kPa
Air volume: 460 l/min
Power: 5 to 110 W, stepless
Noise level: 85 dB maximum
Filter: HEPA, 0.3 micron
Power supply: USB C, PD 3.1 recommended
Operation: slider with stepless power control
Material: ABS, polycarbonate and aluminium
Dimensions: 42 x 63.5 x 35.7 mm
Weight: 77 g
Warranty: 2 years
,
1 x VSGO AirLink Mini Air Blower
1 x Narrow nozzle
1 x Air mattress nozzle
1 x HEPA filter
1 x Tail adapter base
1 x USB C cable of 1.5 metres
1 x 1/4 inch adapter
1 x Storage case
| Značka | VSGO |