📷 Na doplnění detailních informací právě pracujeme.
Máte-li jakýkoliv dotaz k tomuto produktu, neváhejte nás kontaktovat na info@fotobatohy.cz – rádi vám poradíme.
Děkujeme za vaši trpělivost.
Tým Fotobatohy.cz
PGYTECH Zipod Travel Tripod Kit (Midnight Black)The PGYTECH Zipod Travel Tripod Kit (Midnight Black) carries 10 kg and is built for photographers who actually take their tripod along. The legs are T800 carbon and the ball head with SnapLock quick release system is already fitted. One pull extends a leg: the ZipLock leg lock catches by itself at any height.
Highlights
ZipLock leg lock that catches after a single pull and retracts with a quarter turn counter clockwise
Ball head with SnapLock quick release system that fits most Arca Swiss plates, cages and L brackets
Five leg sections and a folded length of 43 cm, so it slides into the side pocket of a camera bag
Levelling base with ±8° of play and a luminous bubble level, so you level up without touching the centre column
Detachable centre column that you invert or shorten to a low position of 16 cm
Swappable feet with rubber tips and 25 mm metal spikes
OperationThe ZipLock leg lock uses reverse leg rotation, which leaves no play in the lock. You pull a section to the height you want and it stays there. A counter clockwise turn lets the leg retract again, so you never clamp or open sections one by one.
MaterialThe tubes are built from eight layers of T800 carbon with a wall thickness of 0.9 mm, wound in one continuous process. That layup has a higher tensile strength than the usual T300 carbon, which you notice in wind or with a long telephoto lens on top. The spider and the clamps are aluminium.
Centre columnThe centre column is removable. Extended it reaches 150 cm; take it out, fit the short column and you drop to just above the ground. The quick release at the bottom lets you invert the column, and the hook underneath takes your camera bag as a counterweight. A double ended S4 and T8 bit sits inside the column, so you carry no tools.
Ball headThe ball head tilts from 90° to 40°, which lets you turn the camera upright for portrait work. The base pans a full 360° and carries a degree scale on the rim, useful for panoramas and for returning to the same position. A safety pin in the clamp holds the plate if it works loose.
CompatibilityThe SnapLock system has a pass through rail on both sides and takes most Arca Swiss quick release plates, cages and L brackets. The spider has a 1/4" 20 socket with Arri style locating pin holes for a magic arm or a monitor bracket. The leg tubes come off, so you can clean them after a day in the sand.,
Type: Travel tripod with ball head
Material: T800 carbon and aluminium
Colour: Midnight Black
Maximum load: 10 kg
Working height with centre column raised: 150 cm
Working height with centre column retracted: 123 cm
Minimum height: 16 cm
Folded length: 43 cm
Number of leg sections: 5
Leg lock: ZipLock
Maximum tube diameter: 26 mm
Leg angles: 23°, 53°, 81°
Levelling base: ±8°
Tripod head: Ball head with SnapLock quick release system
Ball diameter: 30 mm
Tilt range: 90° to 40°
Pan range: 360°
Quick release system: Arca Swiss compatible
Spider socket: 1/4" 20 with Arri style locating pin holes
Feet: Rubber feet and metal spikes (25 mm)
Operating temperature: 30 °C to 70 °C
Weight: 1.30 kg
Warranty: 2 years
Specification
| Značka | PGYTech |
Chcete hledat ThinkTank,URTH,Gomatic,Zeiss,WANDRD